[文件]DescText =“EDS-file Anybus X-gateway CANopen大师”;CreateDate = 02-18-2010;CreateTime = 15:50:28;ModDate = 12-14-2010;ModTime = 13:56:28;修订= 1.2;(设备)VendCode = 90;VendName =“HMS网络”;ProdType = 12;ProdTypeStr = "通信适配器”; ProdCode = 51; MajRev = 2; MinRev = 1; ProdName = "Anybus X-gateway CANopen master"; Catalog = "Anybus X-gateway CANopen master"; [Device Classification] Class1 = 1_RSNetWorx_Adapter; Class2 = ControlNet; [Params] Param2 = 0, $ first field shall equal 0 ,, $ path size,path 0x0000, $ descriptor 0xC7, $ data type : 16-bit Unsigned Integer 2, $ data size in bytes "Output Size", $ name "", $ units "", $ help string 0,450,16, $ min,max,default data values ,,,, $ mult,dev,base,offset scaling not used ,,,, $ mult,dev,base,offset link not used 0; $ decimal places not used Param3 = 0, $ first field shall equal 0 ,, $ path size,path 0x0000, $ descriptor 0xC7, $ data type : 16-bit Unsigned Integer 2, $ data size in bytes "Input Size", $ name "", $ units "", $ help string 4,454,20, $ min,max,default data values ,,,, $ mult,dev,base,offset scaling not used ,,,, $ mult,dev,base,offset link not used 0; [Connection Manager] Connection1 = 0x04010002, $ trigger & transport $ 0-15 = supported transport classes (class 1) $ 16 = cyclic (1 = supported) $ 17 = change of state (0 = not supported) $ 18 = on demand (0 = not supported) $ 19-23 = reserved (must be zero) $ 24-27 = exclusive owner $ 28-30 = reserved (must be zero) $ 31 = client 0 (don't care for classes 0 and 1) 0x44240405, $ point/multicast & priority & realtime format $ 0 = O=>T fixed (1 = supported) $ 1 = O=>T variable (0 = not supported) $ 2 = T=>O fixed (1 = supported) $ 3 = T=>O variable (0 = not supported) $ 4-7 = reserved (must be zero) $ 8-10 = O=>T header (4 byte run/idle) $ 11 = reserved (must be zero) $ 12-14 = T=>O header $ 15 = reserved (must be zero) $ 16-19 = O=>T point-to-point $ 20-23 = T=>O multicast $ 24-27 = O=>T scheduled $ 28-31 = T=>O scheduled ,Param2,, $ O=>T RPI,Size,Format ,Param3,, $ T=>O RPI,Size,Format ,, $ config part 1 (dynamic assemblies) ,, $ config part 2 (module configuration) "Discrete Exclusive Owner", $ connection name "", $ Help string "20 04 24 01 2C 96 2C 64"; $ exclusive output path 1_PLC5C_RTD_Format1 = 1_PLC5C_1794_Discrete_RTD_Format; [Port] Port1 = ControlNet_Redundant, "Port A", "20 F0 24 01", 2;