$EDS文件1788-EN2DNEthernet连接设备HomeURL='http://www.ab.com/networks/eds/dn001000C008B0100.eds'CreateDate=0301-2003CreateTime=12:00ModDate=08-17-2005ModTime = 11: 00修订版=1.9VendCode=1VendName=Rockwell自动化ProdType=12ProdTypeStr=通信适配器ProdCode=139MajRev2MinRev3ProdName = "1788Ethernet对设备网链接设备"Catalog=1788-EN2DN图标 = 1788en2dn.co1_RSNetWorx_DNetTool = "SdnCnfg.DnScannerDevice"!内存表=0通用I/O表奴隶模式=1$设备网奴隶模式支持共享输入s=1eqt共享输入连接支持ADR=65024$ Amount of config recovery space available InputTable0 = "Input Table", $ Input table definition 3, $ Word base unit - DINT 124, $ Length (in words) 0!$ No read-only bits OutputTable0 = "Output Table", $ Output table definition 3, $ Word base unit - DINT 123, $ Length (in words) 0!$ No read-only bits [Port] Port1 = TCP, $ Port type "TCP/IP", $ Port name "20 F5 24 01", $ Path to object supporting this port 1!$ Internal Port Number Port2 = DeviceNet, $ Port type "DeviceNet", $ Port name "20 03 24 01", $ Path to object supporting this port - DNet object 2!$内部端口数[设计分类]类1=EtherNetIP类2=设备网最大Inst3$最大实例-总#配置参数描述符=0参数类描述器-无参数Cfgserm=0$配置汇编不支持[Params] Param1 = $ Run/Idle Mode 0, $ parameter value slot 6, "20 01 24 01 30 67", $ Class 1, Instance 1, Attribute 0x67 0x0002, $ descriptor (Enumeration) 0xC6, 1, $ USINT, 1 bytes "Mode", $ parameter name "", $ units string "", $ help string 0, 1, 0, $ min, max, default (0=idle, 1=run) 0, 0, 0, 0, $ mult, div, base, offset scaling , , , , $ scaling links not used 0!小数位数Enum1=0,Idle,1,RunParam2 = $ DeviceNet baud rate 0, $ parameter value slot 6, "20 03 24 01 30 02", $ Class 3, Instance 1, Attribute 2 0x0002, $ descriptor (Enumeration) 0xC6, 1, $ USINT, 1 bytes "Baud Rate", $ parameter name "kBaud", $ units string "", $ help 0, 2, 0, $ min, max, default (0=125K) 0, 0, 0, 0, $ mult, div, base, offset scaling , , , , $ scaling links not used 0!小数位数2=0,125,1,250,2,500Param3 = $ DeviceNet autobaud disable 0, $ parameter value slot 6, "20 03 24 01 30 64", $ Class 3, Instance 1, Attribute 100 0x0002, $ descriptor (Enumeration) 0xC6, 1, $ USINT, 1 bytes "Autobaud Disable", $ parameter name "", $ units string "", $ help 0, 1, 0, $ min, max, default (0 = autobaud ON, 1 = autobaud OFF) 0, 0, 0, 0, $ mult, div, base, offset scaling , , , , $ scaling links not used 0!小数位数 Enum3=0Param4 = $ Ethernet adapter output data size 0, $ first field shall equal 0 ,, $ path size,path 0x0000, $ descriptor 0xC7, 2, $ UINT, 2 bytes "Output Size", $ name "", $ units "", $ help string 0, 504, 16, $ min, max, default data values 0, 0, 0, 0, $ mult, dev, base, offset scaling not used 0, 0, 0, 0, $ mult, dev, base, offset link not used 0!$ decimal places not used Param5 = $ Ethernet adapter input data size 0, $ first field shall equal 0 ,, $ path size,path 0x0000, $ descriptor 0xC7, 2, $ UINT, 2 bytes "Input Size", $ name "", $ units "", $ help string 0, 504, 16, $ min, max, default data values 0, 0, 0, 0, $ mult, dev, base, offset scaling not used 0, 0, 0, 0, $ mult, dev, base, offset link not used 0!$ decimal places not used Param6 = $ Input Status register 0, $ first field shall equal 0 ,, $ path size,path 0x0000, $ descriptor 0xD3, 4, $ DWORD, 4 bytes "Input Status Register", $ name "", $ units "See user manual.", $ help string 0, 0, 0, $ min, max, default data values 0, 0, 0, 0, $ mult, dev, base, offset scaling not used 0, 0, 0, 0, $ mult, dev, base, offset link not used 0!$ decimal places not used Param7 = $ Output Command Register 0, $ first field shall equal 0 ,, $ path size,path 0x0000, $ descriptor 0xD3, 4, $ DWORD, 4 bytes "Output Command Register", $ name "", $ units "See user manual.", $ help string 0, 0, 0, $ min, max, default data values 0, 0, 0, 0, $ mult, dev, base, offset scaling not used 0, 0, 0, 0, $ mult, dev, base, offset link not used 0!$ decimal places not used [Assembly] Assem100 = "Input Assembly", "20 04 24 64 30 03", 508,,,, 1, Param6:0, $ Module Run/Idle mode 1, Param6:1, $ Module faulted 1, Param6:2, $ DNet network disabled 1, Param6:3, $ DNet slave comm error 1, Param6:4, $ DNet slave keying error 1, Param6:5, $ DNet bus-off 1, Param6:6, $ DNet dup-mac error 1, Param6:7, $ No DNet network power 24, 0, $ Reserved 4032, !输入数据(504字节)Assem101 = Status大会,20042465303$ Status data (128 bytes) Assem150 = "Output Assembly", "20 04 24 96 30 03", 508,,,, 1, Param1:0, $ System Run/Idle mode 31, 0, $ Reserved 1, Param7:0, $ Local run/idle mode 1, Param7:1, $ Force module fault 1, Param7:2, $ Disable DNet network 1, 0, $ Reserved 1, Param7:4, $ Reset module 27, 0, $ Reserved 4000, !$ Output data (500 bytes) [Connection Manager] Connection1 = $ I/O connection 0x84010002, $ trigger & transpor $ class 1, cyclic, exclusive owner, server 0x44244405, $ point/multicast & priority & realtime format $ O-T: fixed size, run/idle header, pt to pt $ T-O: fixed size, run/idle header, multicast ,Param4,, $ O=>T RPI,Size,Format ,Param5,, $ T=>O RPI,Size,Format ,,,, $ config "I/O Connection", $ connection name "", $ Help string "20 04 24 01 2C 96 2C 64"!$ path Connection2 = $ Input only connection 0x82010002, $ trigger & transport $ class 1, cyclic, input-only, server 0x41244305, $ point/multicast & priority & realtime format $ O-T: fixed size, heartbeat, pt to pt $ T-O: fixed size, run/idle header, multicast ,0,, $ O=>T RPI,Size,Format ,Param5,, $ T=>O RPI,Size,Format ,,,, $ config "Input Connection", $ connection name "", $ Help string "20 04 24 01 2C 03 2C 64"!$ path Connection3 = $ Status connection 0x82010002, $ trigger & transport $ class 1, cyclic, input-only, server 0x21240305, $ point/multicast & priority & realtime format $ O-T: fixed size, heartbeat, pt to pt $ T-O: fixed size, pure data, multicast ,0,, $ O=>T RPI,Size,Format ,128,, $ T=>O RPI,Size,Format ,,,, $ config "Status Connection", $ connection name "", $ Help string "20 04 24 01 2C 03 2C 65"!$[能力]Tspec1=TxRx 84000Tspec2=TxRx5084000maxIO制作人=20最大IOCONERs=1maxMsgConnections=16